Evo-Detailing 431 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 This Ford Mustang is a little special. Not for me because I don't like it at all, but even so, I can appreciate a special car. The base for this project was a 2006 Mustang GT 300 BHP. Motor V8 Modifications list : Suspension KW & Eibach Torsion bars H&R Antera 20 Inch wheels Body Kit (front & rear bumper, sideskirts, air vents, etc)by 3D Carbon The Hood Cervini Ram Air For the engine the decision was to fit a Vortec supercharger this makes the power to be at around 450 BHP. Invidia Exhaust Steeda ceramic coated exhaust manifold. Steeda front Strut Bar. ITG intake Individual coils for each piston by MSD Intercooler Exedy. All this power needed something to stop it, and because the OE brake system was more than insufficient, the owner fitted a Steeda 6 pistons brake kit. The clutch was also replaced with a ceramic Exedy stage 3. Some reinforcements to the body where they were needed complete the imagine of a full project. The interior is completely custom. Black & White was the theme. There is no original element left in the interior except the shift knob. Which will be replaced soon. Leather, alcantara & carbon are the most used materials on the interior The multimedia system consists of. DVD, Navi, Radio Cd - Alpine Front speakers DLS Iridium The rear seats were replaced by 2 subwoofers, 15 inch each DLS Iridium of course. Amplifiers, capacitors and wiring. DETAILNG Initial condition : Few details. Paint defects visible through the dust on the car. The engine : Interior : Pre wash and Wash I used 2BM CG Maxi Suds II CG Green Clean CG Grime Reaper ONR Berner Acrysol SFE Berner Wheel Cleaner First job, wheels and arches : I had no chance to use the hydraulic jack... I love low cars My own jack came in handy at that point. Off you go ! For backup, i used them both The tools : APC Spray : A good rinse followed. A degreaser that I was about to use, was recomanded to be applyed on a dry surface, so I had to dry everything. After the drying The degreaser applyed Left to act for a few minutes, than agitated using a cotton applicator. Rinsed & Bare Bones'd. The Wheel : Lots of SFE. Nice detail. Agitated Rinsed Result Dark side of the Moon Dryed. JWL Standard visibile now Berner wheel cleaner on the tyres : Result. 2 coats of CG Wheel Guard. 2 coats of CG NLTG On the tyres and the final result is ... : Fited the wheel onto the car and continue in the same manor to the rest of the car Prewash done with Meg's Apc The first rinse Another rinse Clean GT Final rinse : Drying : ONR + Sonus Green Clay: After another rinse : Gettin there .... Hello friend WRAAAAAAAMMMMMMMM So after the wash & decontamination stage, the car looked like this : Paint Correction ! Coming through. Inside. After only one pass with the test combo. Results. The whole thing : The white parts of the car were attaked next : Results. I was taking a pic : This one . Tail lights : Before After Closeup + Macro. Black side : reflection 50/50 door vs fender. Done. Little sunshine. Half done. Front bumper Left side LSP Meg's No26. Motor Air dryed : for looks and a little protection after a half day's work One more day gone Interior Back side of the seats was polished by hand and protected with Meg's wax A final wash ! The results of 4 days, working more than 10 hours/day. Alex Lascu EVOLUTON DETAILING 2011. 31 Siter Lenke til kommentar Del på andre sider More sharing options...
TobiasW 323 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 Beautiful job on a special car! Much better pictures from you this time And very cool interior! Siter 2008 Audi A6 Allroad - solgt 2016 BMW X5 40e Lenke til kommentar Del på andre sider More sharing options...
Moderatorer Christer 2 924 Skrevet 28 November, 2011 Moderatorer Rapporter Share Skrevet 28 November, 2011 I want it. Siter It's not the end of the world, but you can see it from here. Samlede Werx | Bilpleielogg Lenke til kommentar Del på andre sider More sharing options...
trogha 460 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 Nice job Siter Lenke til kommentar Del på andre sider More sharing options...
Fenwick 74 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 Great work!!! Siter Lenke til kommentar Del på andre sider More sharing options...
Anders_Aa 151 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 Really nice job! And a great car Siter Lenke til kommentar Del på andre sider More sharing options...
Tonytic 48 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 very nice car, and a nice job. must be fun to work with cars like this Siter Lenke til kommentar Del på andre sider More sharing options...
bilmagikeren 40 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 nice job, with MANY good pictures:) Great car allso.. Siter Min bilpleielogg Bilmagikeren https://www.facebook.com/pages/Bilmagikeren/577147932314148 Kikk gjerne innom å se om du vil:) Swissvax certified detailer Scandicshine autorisert detailer Scholl Consepts certified detailer Mitchell and King approved detailer Lenke til kommentar Del på andre sider More sharing options...
hmsilset 3 855 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 (endret) Fantastic job on a very nice Mustang! Great pictures in this S&S Endret 28 November, 2011 av hmsilset Siter Hobby detailer som ofte har med bileiere på jobbene 10 timers detail som nybegynner.Facebook-hmsilset-bilpleie Twitter-@fastdetail Lenke til kommentar Del på andre sider More sharing options...
JørgenP 0 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 Great job and writeup, love the interior! Siter Lenke til kommentar Del på andre sider More sharing options...
JensChristian 187 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 Great job, I love the pictures. Looks like you got a great working-environment too! Cred given. Siter Lenke til kommentar Del på andre sider More sharing options...
Knutis 763 Skrevet 28 November, 2011 Rapporter Share Skrevet 28 November, 2011 Nice writeup and awsome pics. You know there are very low hydraulic jacks made for lowriders? You should get one of those. Siter Knutis' maskintråd Lenke til kommentar Del på andre sider More sharing options...
Evo-Detailing 431 Skrevet 28 November, 2011 Forfatter Rapporter Share Skrevet 28 November, 2011 Thank You. About the pics, I had some help from a friend, which was kind enough to take some. And yes, I already ordered a low entrance car jack. Siter Lenke til kommentar Del på andre sider More sharing options...
Oluf 328 Skrevet 7 Desember, 2011 Rapporter Share Skrevet 7 Desember, 2011 A very nice job on a very nice car. I usually don't like too much modification, but this is really an exception, especially the interior. Great work! Siter Lenke til kommentar Del på andre sider More sharing options...
ErlendT 100 Skrevet 7 Desember, 2011 Rapporter Share Skrevet 7 Desember, 2011 N I C E !!!!! Siter "The difference between something good and something great is attention to detail" - Charles Swindoll Lenke til kommentar Del på andre sider More sharing options...
Simen 1 329 Skrevet 8 Desember, 2011 Rapporter Share Skrevet 8 Desember, 2011 (endret) Very nice work, dude! Seeing just the pictures, it looks like it's perfect! Endret 8 Desember, 2011 av Simen Siter Lenke til kommentar Del på andre sider More sharing options...
Recommended Posts
Bli med i samtalen
Du kan poste nå og registrere deg senere. Hvis du har en konto, Logg inn nå for å poste med din egen konto.